2014-02-13, 08:42 | Link #1 |
is this so?
Join Date: Mar 2007
Location: Gradius Home World
|
2nd CPU fan too noisy
Hi. I've finished installing a new motherboard. All is ok except the second fan (the one on the side is too noisy). Maybe it's spinning too fast? It wasn't noisy when my old motherboard was using it.
Can somene please help me on how to reduce the speed of a CPU fan, so that there's less noise? I can provide the brand of my new motherboard if that's needed. Thanks.
__________________
|
2014-02-13, 13:28 | Link #2 |
ゴリゴリ!
Graphic Designer
Join Date: Jan 2009
Location: Vancouver, British Columbia
Age: 33
|
There are numerous options, depending on your build. My personal build has a case with a built in fan control switch (which you could purchase separately). Aside from that, you could try using SpeedFan, though it will require a little tweaking and such. If you can get into the BIOS, it may have options to control fan speed in there as well.
Make sure you grab CoreTemp afterwards to make sure your CPU is at a proper temperature. A cooled CPU is much more important than noise reduction.
__________________
|
2014-02-15, 08:24 | Link #5 |
is this so?
Join Date: Mar 2007
Location: Gradius Home World
|
Thanks everyone, and so sorry for replying late to this thread. I sort of got busy yesterday. ><
My new board is an EMX-A55FM2HD This is the large fan at the side that got noisy. It worked just fine with the old board, so I thought the new board might be supplying too much power to the fan. My previous board lasted more than 8 years, and I think the cooling from this large fan helped the old board live that long.
__________________
|
2014-02-15, 10:07 | Link #6 |
Senior Member
Join Date: Oct 2008
Location: Quebec
Age: 32
|
Ok, it is not the CPU fan, just the rear case fan (standard on almost all case).
Is the noise from it going too fast, or is it a grinding/whining noise from old age? Is it sound like it is going fast, or that it might have a problem? Also, it cannot be supplied more power, it's 12v and whatever AMP it take. The CPU fan should be connected to the cpu_fan header on the motherboard to control correctly. The back fan should be on a sys_fan. It is however possible for the header to only take 4pin PWM and not 3pin voltage control. That would make the fan spin at max speed all the time. |
2014-02-15, 12:27 | Link #7 |
Senior Member
Author
Join Date: Oct 2007
Location: Philippines
Age: 47
|
Cheap low-quality fans that come for much less will surely screech after a few months.
Well, I think a better casing fan is in order, and I've been using DeepCool casing fans for more than a year; they're well-done, affordable, solid and are almost quiet. They also come in lots of varieties, be it regular, quiet or with lights: http://www.deepcool-us.com/product/d...an/index.shtml If you want full speed, the casing fan should be connected directly to the PSU's 4-pin molex, rather on the board.
__________________
|
2014-02-16, 10:34 | Link #8 |
is this so?
Join Date: Mar 2007
Location: Gradius Home World
|
I appreciate all of the answers.
Problem has been fixed now.. the problem sort of fixed itself actually. Unpleasant noise from the fan just stopped on it's own. Will post again on this thread if the noise comes back. @spikexp The noise is sort of a grinding noise. It went on for about 2 days, then stopped.
__________________
|
2014-02-17, 08:36 | Link #9 |
( ゚∀゚)アハハ八八ノヽノヽノヽノ \ / \/
Join Date: Aug 2012
Location: (◣_◢)
|
http://www.almico.com/speedfan.php
So it wasn't going VROOOOM? That will sometimes happen if the humidity gets high or the temperature in the room gets hot.
__________________
|
|
|